24 May 13 | GETTING STARTED WITH PARTMAKER SWISSCAM AND TURN-MILLTime: 1:00 PM ET (10:00 AM PT)
Webinar Code: WEB-GS
Cost: Free
Duration: 1 hour
Who Should Attend?
If you are new to PartMaker, this webinar will give you an overview of the PartMaker working environment and review general programming concepts. This webinar is strongly recommended to anyone who will be attending a PartMaker training class. Register Now | PartMaker |
24 May 13 | INTRO TO POST CUSTOMIZATIONTime: 3:00 PM ET (12:00 PM PT)
Webinar Code: WEBCT
Cost: Free
Duration: 1 hour
Who Should Attend?
Current PartMaker users who wish learn how to customize their NC program formats using "Config-by-Click" technology and PartMaker ConfigPost Version 7.5 and higher Register Now | PartMaker |
31 May 13 | ADVANCED MANUFACTURING EDU SERIES: IMPLEMENTING HIGH SPEED MACHININGTime: 1:00 pm ET (10:00 am PT)
Webinar Code: EDU-HSMNG
Cost: FREE
Duration: 1 hour
Who Should Attend?
This webinar will provide you an understanding of what high speed machining is all about and will discuss the benefits of high speed machining. It will explain what sort of tooling you need to use perform high speed machining effectively and what CNC control functions you’ll need to perform high speed machining. Register Now | PartMaker |
31 May 13 | ADVANCED MANUFACTURING EDU SERIES: USING 5-AXIS SIMULTANEOUS MACHININGTime: 3:00 pm ET (12:00 pm PT)
Webinar Code: EDU-5AX
Cost: FREE
Duration: 1 hour
Who Should Attend?
5-Axis machining isn’t just for making turbine blades and engine ports. 5-Axis machining has a number of benefits including providing improved surface finishes and better cycles times. This webinar will explain these benefits as well as discuss the CNC control functionality you are going to need to take advantage of these more sophisticated programming and machining techniques Register Now | PartMaker |
7 Jun 13 | PROGRAMMING WITH SOLID MODELS IN PARTMAKERTime: 1:00 PM ET (10:00 AM PT)
Webinar Code: WEBSOLIDS
Cost: FREE
Duration: 1 hour
Who Should Attend?
This webinar will give you an understanding of how to use PartMaker to program directly on solid models in the PartMaker Mill, Turn, Turn-Mill and SwissCAM modules. This webinar is a must for any user who uses solid models regularly in their CNC programming operations and is not familiar with many of the new methods for programming on solid models introduced in PartMaker Version 9. Register Now | PartMaker |
